1131 IOS upgrade to LWAPP fails

Unanswered Question
Jun 26th, 2008

Has anyone seen this before or know of a workaround. The 1131 is operating with IOS version 12.4(10b)JA3. We tried to perform this upgrade using two different laptops, but received the same message “Unable to get root certificate status”… we received this same message when trying to migrate a different 1131 that is operating with the same IOS version.

2008/06/26 17:54:18 INFO Created RSA Keys successfully

2008/06/26 17:54:18 DEBUG Generating Public Key

2008/06/26 17:55:03 DEBUG Generating SSC Certificate

2008/06/26 17:56:05 INFO SSC Generated Successfully

2008/06/26 17:56:05 DEBUG Saving the SSC Configuration

2008/06/26 17:56:36 INFO Saving SSC Certificate

2008/06/26 17:56:36 DEBUG Generating Root Certificate

2008/06/26 17:56:36 DEBUG Check whether Root Certificate is already present or not

2008/06/26 17:57:27 ERROR Unable to Get Root Certificate Status

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
dennischolmes Mon, 08/11/2008 - 05:34

Sounds like corrupted original version of autonomous code Scott. I would downgrade the code back to autonomous which should give a good image back to the AP then try the upgrade again. If that fails, I'd check to make sure the image I'mm using for upgrade hasn't got corrupted. I'd also download another copy of the tool if you're using the stand alone version. If all those fail it could be bad memory on the AP.

Scott Fella Mon, 08/11/2008 - 06:22


Thanks.... What fixed it was that we had to strip out alot of the configuration to bare basics. Seemed like the upgrade works better that way instead of trying to upgrade AP's with full configurations.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode