06-26-2008 10:21 PM - edited 03-15-2019 11:34 AM
We have a need to change the ringing tone of an ATA depending whether the call is from an external phone (DID) or an internal extension. It is connected to a night bell and they want to identify the call as internal or external.
We are using Call Manager 4.2.3
Thanks
Scott
06-28-2008 12:56 PM
Hi,
The ATA provides only the ringing voltage/interval for the analog phone/device.
A workaround could be, get a second night bell connected on the second ATA interface.
The external, incoming DID must be translated to a second, different internal number (second interface on the ATA).
ATA interface 1 => night bell 1 (internal)
ATA interface 2 => night bell 2 (external)
Only an idea ;-)
Greets
Norbert
06-29-2008 02:07 PM
Thanks for your suggestion.
I was hoping that we did not have to go down that track, but maybe we do.
Cheers
Scott
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide