CME "CFA Rules" ?

Unanswered Question
Jun 26th, 2008
User Badges:

Hi,


Quick question. Is is possible to allow a user to dial a number, but block him from CFA to the same number. For Example: A user is allowed to call Mobile numbers, but is not supposed to CFA to a Mobile numbers. Anyone try this?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
kumar3880 Fri, 06/27/2008 - 03:43
User Badges:

hi i suppose we can assign a CSS to the CFA so tht calls may not be forwarded any numbers outside the CSS.


regards

kumars

paolo bevilacqua Fri, 06/27/2008 - 03:47
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Kumar,


the question is about CME, not CM, so CSS do not apply.


Fulcherke, if you're trying to prevent call-forward to external numbers, the easier way is to limit tha maximum number of digits. You can do that with "call-forward max-length" under ephone-dn-template.

Keith Fulcher Fri, 06/27/2008 - 03:54
User Badges:

Not really to external numbers, but to specific numbers. Normally I would agree with your assessment about the Max number of digits. However, this is a SRST CME for a large company with a long internal number plan. In Germany (where I am at) there is not a set 10 digit number dial plan, so I can not set a max-number without colliding with the users right to CFA Internally. Is there such a thing as Cor lists that can be applied to CFA? I know this is an off the wall question, but I figured someone might have tried it out.

paolo bevilacqua Fri, 06/27/2008 - 03:58
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

It may be a bit complicated to do that.


The reason is because I think the "transfer-pattern" command do not apply to CF.


I will revert back to you once I can suggest a solution.

Actions

This Discussion