06-27-2008 04:35 AM
Hi,
I'm trying to set up a 2811 as modempool with Dialout/Ez on the client. The problem is that the connection is terminated upon establishing the connection.
Sometimes it doesn't even show the login prompt to the remote RAS-server, and other times a login is possible and a few packets can be sent before it terminates.
Thanks
Andreas
Solved! Go to Solution.
06-27-2008 04:45 AM
Hi,
likely you do not have clock configured correctly, please configure:
network-clock-participate wic 0
network-clock-select 1 e1 0/0/0
Please rate post if it helps!
06-27-2008 04:45 AM
Hi,
likely you do not have clock configured correctly, please configure:
network-clock-participate wic 0
network-clock-select 1 e1 0/0/0
Please rate post if it helps!
06-30-2008 11:27 PM
Thanks, it did the trick and sorry for not RTM.
Kind Regards
Andreas
07-01-2008 02:49 AM
Sometime the manual is not very useful in saying what is really needed and what is not.
Thanks for the appreciation and good luck.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide