06-27-2008 06:48 AM - edited 03-18-2019 09:12 PM
When I add a NTP server on the publisher, it always shows as "not accessible".
Any ideas on how to make it available?
06-27-2008 06:55 AM
Make sure you can access the ntp device on port 123, see if you can telnet to that port on that device. Also, try removing the ntp, set the clock mnaually to the ntp server as close as possible and then re-add the ntp server, wait few hours and see if it synchronizes.
Chris
07-07-2008 01:37 AM
please check the stratum value of ntp server is 9 or higher.if stratum value of ntp server is lessthan 9 callmanager didn't receive the time from ntp server.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide