WCS + 2 x WLC 4402 x 25 AP = ?

Answered Question
Jun 28th, 2008

Is it possible to use WCS + 2 WLC 4402 with 25 APs license to control 50 APs?

Thanx!

I have this problem too.
0 votes
Correct Answer by rob.huffman about 8 years 6 months ago

Hi Mikhail,

Yes, this config is perfectly acceptable and will support 50 AP's :) It will not support any futre growth as far as adding additional AP's (without adding a new WLC)You also might want a third WLC to be used in an N+1 Topology in case of a WLC failure.

But other than that you should be good to go.

Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
rob.huffman Sat, 06/28/2008 - 11:10

Hi Mikhail,

Yes, this config is perfectly acceptable and will support 50 AP's :) It will not support any futre growth as far as adding additional AP's (without adding a new WLC)You also might want a third WLC to be used in an N+1 Topology in case of a WLC failure.

But other than that you should be good to go.

Hope this helps!

Rob

m.sobolev Sat, 06/28/2008 - 11:13

Thank you :) WiFi is not critical for us, we just need some more APs and fortunately have second 4402 :)

Actions

This Discussion