Errors with module1

Unanswered Question
Jun 28th, 2008
User Badges:

Hi people,


I am getting the status from module1 is MinFail & for module2 is ok.


I think the Chasish crossed the minimum temperature am i right?


Message: module 1 inlet temperature crossed threshold #1=45C



Switch>sh module 1

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

1 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX SAL1103E6A3


Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

1 001a.a1a2.e610 to 001a.a1a2.e63f 1.5 8.4(1) 8.5(0.46)RFW MinFail


Mod Online Diag Status

---- -------------------

1 Pass



Switch>sh module 2

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

2 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX SAL1151AN2J


Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

2 001e.7af9.16b0 to 001e.7af9.16df 1.6 8.4(1) 8.5(0.46)RFW Ok


Mod Online Diag Status

---- -------------------

2 Pass



Experts can anybody plz. suggest me on this.



Regards,

Naidu.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Sun, 06/29/2008 - 12:27
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Naidu,

have someone check the cooling system for the rack.


Just to see if something changes you can open the rack door if any.


best regards

Giuseppe

ilnaiduccna Wed, 07/02/2008 - 02:14
User Badges:


Hi Giuseppe,


Thanx for your reply.


I am at remote location so i need to check with them.


Regards,

Naidu.

Actions

This Discussion