PIX Version 6.3(5) can support VPN site to site and VPN Client?

Unanswered Question
Jun 29th, 2008
User Badges:

Dear All,


I woulk like to ask you about VPN.

now i had Cisco PIX 506 and PIX Version 6.3(5) i would like to do VPN site to site and VPN client only one box?

Is it support on this version?


Best Regards,

rechard

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
purohit_810 Sun, 06/29/2008 - 21:02
User Badges:
  • Silver, 250 points or more

It doesn't beacause 6.3 doesn't suports both.


second 506 has no VPN accelarator module. So, it can't.


You have to upgrade your firewall and ver 7.x.


Pix is end of sale, so you have to buy ASA 5500 firewall.


Thanks,

Dharmesh Purohit

Richard Burts Mon, 06/30/2008 - 09:21
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Dharmesh


I believe that you are mistaken in stating that the PIX does not support both site to site and remote access VPN. This link is to a chapter in the PIX configuration guide for release 6.3 and focuses on configuration of site to site VPN:

http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/sit2site.html


And this link is to a chapter in the same PIX config guide showing configuration of PIX for remote access VPN:

http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/basclnt.html


So clearly the PIX version 6.3 does support doing both site to site and remote access VPN.


HTH


Rick

Actions

This Discussion