Appreciate any pointers on this. I have a 7609 Sup720-3BXL and uses 7600-ES20-10G3CXL or SIP-400/SPA-1x10GE for Core facing connectivity (p-pe). On the attachment circuit (AC) end, i have a WS-X6724-SFP.
Question: Is it possible to have EoMPLS:Port-mode or VLAN-mode co-existing with a VPLS setup on the same box? The EoMPLS P2P circuits are independent of the M2M VPLS VSI.
Example configuration on 7609:
description P2P EoMPLS to R2
encapsulation dot1q 200
xconnect 188.8.131.52 200 encapsulation mpls
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 100-199
switchport mode trunk
description M2M VPLS to R3 & R4
xconnect vfi V100
l2 vfi V100 manual
vpn id 100
neighbor 184.108.40.206 encapsulation mpls
neighbor 220.127.116.11 encapsulation mpls
No problem for them to coexist but take care of a critical point though, because point-to-point and VPLS Layer 2 VPNs share the same Pseudowire ID space (since targeted LDP is used for both), you need to ensure that VPN IDs that are used in VPLS do not overlap with Pseudowire IDs that are used in point-to-point Layer 2 VPNs.