DHCP how to assign one of the scopes to the WLAN

kdamiandotnet · ‎06-30-2008

Hi,

I have configured 3 DHCP scopes and one WLAN. As I don't see any clear option, can you explain how to bind a particular scope to a WLAN?

Thanks

Scott Fella · ‎06-30-2008

You need to make sure your wlan ssid is mapped to one of the subnets in which you created a DHCP scope.

-Scott
*** Please rate helpful posts ***

david.lucas · ‎07-11-2008

On the Dynamic interface that you assign to the WLAN you need to make sure you have the DHCP Server IP address as the MGMT interface of the controller. Clients that associate to that SSID will then get an IP address that is in the same network as that dynamic interface.

HTH