Problem while configuring E1

Unanswered Question
Jun 30th, 2008

I've a router 3725 with a DS3 as main link, now I want to implement a back-up solution via the E1 interface. But when I wanted confiugre my E1 in mode atm aim 1, the traffic has been impacted on the main link, have you an idea why?

I suspect the ATM AIM module which is in slot 1 and the E1 is plugged on slot 0.


sh diag :


Slot 0:

WIC Slot 1:

E1 (2 port)

WIC Slot 2:

E1 (2 port) WAN daughter card


Slot 1:

ATM DS3 Port adapter, 1 port

AIM ATM: 1

ATM AIM

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Richard Burts Mon, 06/30/2008 - 08:59

Yavuz


What you posted does confirm that the E1 is in slot 0 and the DS3 is in slot 1. But that does not help us much to understand what the problem is. Perhaps you could describe the problem a bit more clearly? A good place to start would be to post the configuration of the router.


HTH


Rick

yavuz.ozdemir Tue, 07/01/2008 - 04:19

Hi Rick,

Here is the config. of the router when I tried to configure the E1 in ATM MODE, the traffic was impacted on the main link ping success was 60% when I removed the command on the E1 the traffic became ok.

Can you advise me please.


hostname TEST

!

boot-start-marker

boot-end-marker

!

logging buffered 50000 debugging

!

memory-size iomem 10

no network-clock-participate wic 1

no network-clock-participate wic 2

no network-clock-participate aim 1



ip subnet-zero

no ip source-route

!

!

ip cef

no ip domain lookup

!

no ip bootp server

!

!

!

!

controller E1 0/0

====> I wanted to configure in "mode atm aim 0" the traffic has been impacted.

!

controller E1 0/1

!

controller E1 0/2

!

controller E1 0/3

!

!

!

interface FastEthernet0/0

ip address 192.168.1.1 255.255.255.0

duplex auto

speed auto

!

interface FastEthernet0/1

ip address 192.168.80.1 255.255.255.0

ip helper-address 192.168.82.10

duplex auto

speed auto

!

interface ATM1/0

no ip address

logging event subif-link-status

atm scrambling cell-payload

no atm ilmi-keepalive

pvc 0/5 qsaal

!

pvc 0/16 ilmi

!

!

interface ATM1/0.1 point-to-point

ip address 10.0.32.198 255.255.255.252

pvc 0/334

broadcast

oam-pvc manage

!

!

interface ATM1/0.2 point-to-point

ip address 10.30.0.69 255.255.255.252

pvc 0/340

broadcast

oam-pvc manage

!

!

interface ATM1/0.3 point-to-point

ip address 10.30.0.73 255.255.255.252

pvc 0/341

broadcast

oam-pvc manage

!

!

ip http server

ip classless

ip route 0.0.0.0 0.0.0.0 ATM1/0.2


!


Actions

This Discussion