06-30-2008 05:44 PM - edited 03-05-2019 11:54 PM
Hello,
I am trying to host a wbesite on a Linux server that sits behind an 871w router. When I try to telnet to the public ip port 80 I get "Could not open connection to the host on port 80" Do I need to add a NAT route or modify the ACL? My config is attached.
Thank you,
John
06-30-2008 06:20 PM
You will need a NAT statement, what's your public and private IP for your Linux server? You can post a fake public.
06-30-2008 07:43 PM
Public (fake) 73.183.224.30
linux server: 10.0.1.99
Thanks for your reply...
07-01-2008 03:06 AM
Hi,
You have a ACL also applied on the fasteth interface.
regards,
pravin
07-01-2008 06:50 AM
Static NAT rule.
static (inside,outside) 73.183.224.30 10.0.1.99 netmask 255.255.255.255
ACL (not sure if needed, since you already have internal ACL)
permit tcp any host 73.183.224.30 eq www
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: