06-30-2008 06:50 PM - edited 03-05-2019 11:55 PM
I have placed a hwic-4esw in my 2801.
I've created a subinterface and assigned that switchport to that vlan. I have then connected it to my 3750. I can see the link in cdp. I can even see the mac of the hwic-4esw in my 3750 mac table, but nothing more than that. I've attached the configs.
Solved! Go to Solution.
06-30-2008 10:49 PM
no interface FastEthernet0/1.75
interface Vlan 75
description DMZ
ip address 10.10.75.22 255.255.255.0
no ip redirects
ip unreachables
no ip proxy-arp
no cdp enable
06-30-2008 10:30 PM
hi,
if You want connect DMZ to port on HWIC-4ESW You must setup interface VLAN 75 with IP ADDRESS. Interface FastEthernet 0/1.75 is part of trunk on FastEthernet 0/1?
regards
romek
06-30-2008 10:49 PM
no interface FastEthernet0/1.75
interface Vlan 75
description DMZ
ip address 10.10.75.22 255.255.255.0
no ip redirects
ip unreachables
no ip proxy-arp
no cdp enable
07-01-2008 05:02 AM
Get rid of the subinterface and create the following . Put that switchport into vlan 75.
Sorry didn't see the previous post which said the same thing!!
interface vlan 75
description DMZ
encapsulation dot1Q 75
ip address 10.10.75.22 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
no cdp enable
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide