06-30-2008 08:47 PM - edited 03-18-2019 09:13 PM
When integrating Pub & Sub with Unity Connection 2, if I have a 16-port voice mail license, do I have to separate ports for the Pub & Sub...ie, 8 ports for the Pub and 8 ports for the Sub (for example). I am asking before I do a failover test of the Pub going down.
06-30-2008 09:39 PM
Hi Arthur,
All 16 ports will be configured in the Pub only :) The Sub will be associated via the Device Pool/CCM Group chosen during the integration;
Hope this helps!
Rob
07-01-2008 03:24 AM
just to add to the great info from Rob, take notice at table:
Table 3-15 Settings for the Cisco Unified Communications Manager Servers
IP Address or Host Name
Enter the IP address (or host name) of the secondary Cisco Unified CallManager server.
make sure to have the SUB there
and also in the CUCM group in CUCM.
HTH
javalenc
if this helps, please rate
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: