cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1189
Views
0
Helpful
2
Replies

Interface atm crc error

rleung2001
Level 1
Level 1

I have a question about the different between 2 crc errors

ADSL circuit has packet loss, when I enter show dsl int atm 0/0/0.

The crc Errors and Header Errors are 0.

This is good.

When I enter show inter atm 0/0/0.

The crc value is incrementing when packet loss occurred.

What is/are the differece between 2 crc?

2 Replies 2

purohit_810
Level 5
Level 5

Crc occur most of the reason, Physical layer issue. You can follow this link for step by step troubleshooting.

http://www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a00800c93ef.shtml

Make sure, your cable is good,

Make sure your modem is configured good,

Check link releibility " Show interface " command.

check utilization of Link by " Show interface "

Thanks,

Dharmesh Purohit

bill.morton
Level 1
Level 1

The other day while troubleshooting I had a DSL circuit that had huge CRC and header errors on the sh dsl interface atm0/0/0; it ended up being the providers circuit. SNR went from 9db to 19db after they 'cleaned' the circuit and errors went away.

Do you have a spare WIC to test?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: