[2800 with NM-16ESW and 2 HWIC-1FE]

Carlos A. Silva · ‎07-01-2008

hi,

when trying to configure a 2811 with 3 ethernet modules, the dynamic configuration tool shows the following error:

Errors

1. Incorrect quantity of etherswitch modules (i.e. HWIC-ESW, NM-ESW) selected. Currently there are [3] ESW modules selected for [CISCO2811]. Please select between 0 and 2.

is there a restriction for the HW configuration on a 2811? can you please provide link to documentation?

regards,

c.

Collin Clark · ‎07-01-2008

http://www.cisco.com/en/US/prod/collateral/routers/ps5853/product_data_sheet0900aecd8016bf0b_ps5854_Products_Data_Sheet.html

Check Table 3.

Hope that helps

Carlos A. Silva · ‎07-01-2008

thanks, collin.

the thing here is that the DCT seems to have a restriction (or maybe the box itself). it won't allow you to 'configure' the box to have an NM-16ESW and 2 HWIC-1FE at the same time. maybe it's HW/SW possible, but the dynamic configuration tool won't allow me to.