07-01-2008 06:48 AM - edited 03-18-2019 09:13 PM
I'm trying to set up a new Public Distribution List in Unity 4.2. However, when I try to add members to it the add and remove options are grayed out (the view is selected). I must be missing something?
Thanks
Solved! Go to Solution.
07-01-2008 07:00 AM
Hi Chris,
Have a look at this good Tech Note;
Unity Public Distribution List Options are Dimmed
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_tech_note09186a00809b548b.shtml
Hope this helps!
Rob
07-01-2008 06:52 AM
Did you try setting up subscribers--->CoS? and then adding members.
Cheers
Shahid
07-01-2008 07:01 AM
I'm set up as a default administrator. And also as the owner of the public distribution group. It shows in class of service that I have add and delete access to public distribution groups.
07-01-2008 07:00 AM
Hi Chris,
Have a look at this good Tech Note;
Unity Public Distribution List Options are Dimmed
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_tech_note09186a00809b548b.shtml
Hope this helps!
Rob
07-01-2008 07:11 AM
Thanks Rob. Worked like a charm!
-Chris
07-01-2008 07:48 AM
Hey Chris,
You are most welcome my friend :)
Cheers!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: