07-01-2008 07:05 AM - edited 03-03-2019 10:33 PM
Hi ,
what are the command required to enable SIP inspect on cisco 7200 router .
Thanks
07-01-2008 08:18 AM
Hi,
ou have to list them before tcp or udp keywords, otherwise their control streams will not be inspected and there will be no provision for data sessions.
ip inspect name Internet
ip inspect name Internet h.323 router-traffic
ip inspect name Internet sip router-traffic
interface FastEthernet0/0
ip inspect Internet out
Below is the link for more reference.
http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_i2.html
Hope this helps,
Regards,
Pravin
07-03-2008 09:21 AM
Hi Pravin,
can u pls explain me little more where to use tcp and udp keywords ?
and in which direction i need to apply inpect rule do i need to apply on both interfaces In and Out?
Thanks
07-03-2008 09:37 AM
Actually I believe that no inspect command is needed for SIP.
Current IOS applye "NAT SIP ALG" automatically without configuring anything.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide