FAC

Answered Question
Jul 2nd, 2008

I want implement FAC with the CUCMBE6.

In the siemens pbx we will replace, the FAC or PIN numbers include an (*) asterisk at the beginning of the number. They want continues using this way. It is possible?, is the * an allowed character in the FAC?.

Thanks.

I have this problem too.
0 votes
Correct Answer by Jaime Valencia about 8 years 5 months ago

only allowed 0-9, no other thing

HTH

javalenc

if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jaime Valencia Wed, 07/02/2008 - 08:35

only allowed 0-9, no other thing

HTH

javalenc

if this helps, please rate

Rafael Jimenez Wed, 07/02/2008 - 17:49

javalenc , one idea come to my mind, what if i add for example an *96 (the way used in the siemens pbx) to the route pattern:

9.0XXXXXXXXX*96 with FAC enabled.

Jaime Valencia Wed, 07/02/2008 - 19:21

that would require users to dial the whole number + *96 and then when prompted type in the FAC

not sure if this is what you're looking for

HTH

javalenc

if this helps, please rate

lancesmith Mon, 10/27/2008 - 21:19

I've hit the same sort of issue with a law firm that uses Auth Codes off of their Option 11 Nortel. Currently they can dial from 3 to 15 digits followed by the "#" key and they can call LD or Int'l.

Has anybody figured out a way to get variable length Auth codes working on Call Manager.

Its a piece of cake to do on the Nortel and Avaya, so I am surprised thus far that Cisco doesn't seem to support wildcards such as in route patterns for the Auth Codes.

If anybody has figured out a work arounf i would love to hear it.

thanks in advance

Actions

This Discussion