First SIP Truck Deployment using UC500?

martypearson · ‎07-02-2008

Because this is my first install using a SIP trunk, I got a question from the SIP provider that I am not sure how to answer. Their question is:

"What will the customer require for TN registration with the PBX? Static or Dynamic?"

I am assuming dynamic but I wanted to be sure because all the example SIP trunk configures I have seen used only use 1 IP and their isn't 1 to 1 addressing going on per phone number.

Anyone know how to answer this question?

Thank you

Report Inappropriate Content · ‎07-08-2008

Dynamic registration.

http://www.cisco.com/en/US/docs/voice_ip_comm/sbcs/smartdoc/sysetup2.pdf

http://www.cisco.com/en/US/technologies/tk652/tk701/technologies_white_paper0900aecd80422c70_ns165_Networking_Solutions_White_Paper.html

http://www.cisco.com/en/US/docs/voice_ip_comm/sbcs/uc500/release/notes/u51861RN.html

martypearson · ‎07-08-2008

Thank you! I have read through most of these docs before and did a search on page for Dynamic and there is nothing stating that it will handle SIP trunks "Dynamicly." I just wanted to be sure I have the Teleco the right info...