07-02-2008 08:39 AM - edited 03-15-2019 11:42 AM
Hi All,
I have CME with FXO port and configure call blast script. I have attached configuration in the attachment. when I dial main number, the call hits to voice-port then forward to pots dial peer. But nothing happen and the external phone keeps ringing.
If you can help me out, I'll be very appreciated.
07-02-2008 01:30 PM
Can you take "debug voice dialpeer" and "debug voice application script" with "term mon".
07-02-2008 01:38 PM
07-02-2008 01:55 PM
Hi, in the current form of the script, you need to use a loopback voip DP to trigger a service from an FXO port. Check:
Just configure blast instead of AA.
You could also probably use a translation-profile and rule instead of the above and plar, both things would work.
07-03-2008 07:35 AM
Hi,
The method was great. but still there is a problem. only the first number in "param destinations" rings and second number in "param destinations" only rings once. when I do "show voice port summary", one FXO voice port which dials second number in param statement, only up for 3 seconds and then goes to idle state but the FXO port that dials first number stays up and destination phone rings.
any suggestion would be very appreciated.
Alex
07-03-2008 08:09 AM
Not sure why this is happening. Try collecting "debug voice application script".
The script might need additional debug points, but I'm not sure of when I can add that.
07-03-2008 10:44 AM
Hi,
there was not much output from that debug, I just pasted in the blow. only one phone rings and the other phone doesn't.
thanks for your help
SpexcoUC520W#
Jul 3 18:41:02.765: //14765//TCL :/tcl_PutsObjCmd: act_setup leg 14765
Jul 3 18:41:06.589: //14765//TCL :/tcl_PutsObjCmd: Event ev_progress status N/A leg N/A
Jul 3 18:41:06.609: //14765//TCL :/tcl_PutsObjCmd: SetupDone status ls_000
SpexcoUC520W#
07-03-2008 01:06 PM
Debug shows nothing strange and does not explain why one FXS port stops ringing.
Perhaps I shall test that sometime but I'm not sure when it will be possible.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide