CallManager 4.13 Subscriber SQL Issue after adding to cluster

Answered Question
Jul 2nd, 2008
User Badges:

I have a customer with 1 CM Pub and Sub on version 4.1(3). I added a second subscriber with the same exact version and SR patches. Problem I'm running into is in SQL Enterprise Manager, the replication fails and it complains of "COuld not find stored procedure "IsChangeNotifyReady"". I looked at the Pub and the stored procedure exists. Any ideas? Database names are the original CCM0300 across the board.

Correct Answer by Rob Huffman about 8 years 11 months ago

Hi Jonathan,


Have a look at these good docs;


Reestablishing a Broken CallManager Cluster SQL Subscription with Cisco CallManager


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801d11a6.shtml



Using DBLHelper to Reestablish a Broken Cisco CallManager Cluster SQL Subscription


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801e7ddf.shtml


Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Wed, 07/02/2008 - 18:08
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Jonathan,


Have a look at these good docs;


Reestablishing a Broken CallManager Cluster SQL Subscription with Cisco CallManager


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801d11a6.shtml



Using DBLHelper to Reestablish a Broken Cisco CallManager Cluster SQL Subscription


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801e7ddf.shtml


Hope this helps!

Rob

SAN J Wed, 07/02/2008 - 18:44
User Badges:

Yeah, saw the doc after I posted this. I reinitialized the db and restarted the risc data collector and that did the trick. thanks for the response...

Actions

This Discussion