07-03-2008 06:03 AM - edited 03-15-2019 11:43 AM
hi all,
I was wondering if anyone knows how to do this on MGCP with CCM 4.1(3) I know this is possible on 323 GWs but cannot find anything on CCO..
07-03-2008 06:18 AM
we really need to create a doc that states this so no one gets confused, this canNOT be achieved with MGCP, ONLY H323. applies to ANY CUCM version.
Call Blocking Configuration Examples
Reject Calls
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml#reject
BTW, please try searching within NetPro. there are tons of posts with this same question
HTH
javalenc
if this helps, please rate
07-03-2008 06:30 AM
Hi Carl,
Just to add a touch to the great info from Jaime;
This is possible if the Gateway uses H.323, there is no way using MGCP :( Many have tried .........
Mahesh @ Cisco
TAC Case from Jorge
http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K15182736
Another good related thread (answers from both Mahesh and Jorge)
Hope this helps!
Rob
07-03-2008 06:38 AM
thanks all - looking grim eh!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: