cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1139
Views
0
Helpful
2
Replies

[IOX 3.4 to 3.6 software upgrade procedure document]

Carlos A. Silva
Level 3
Level 3

hi, all:

does anybody have a document describing the procedure to be followed when upgrading from IOX 3.4 to 3.6? all i can find on the web is going from IOS to IOX which i don't want.

please help!

c.

2 Replies 2

tstanik
Level 5
Level 5

Here is the URL for the up gradation requirement for the IOX which will help you :

http://www.cisco.com/en/US/ts/fn/620/fn62788.html

Please see this document for more details.

http://www.cisco.com/web/Cisco_IOS_XR_Software/pdf/XR12000_Upgrade_Procedure_3_4_x_3_5_x__3_6_x_to_3_6_1.pdf

Even though everything is documented in here, please perform the procedure on your LAB routers which have identical SMU's and PIE's as your live routers, including the hardware ( i say hardware as well because if you have a firewall module in live it will have an additional pie for it, and if you have to have identical pie's in LAB then you need to have identical hw as well).

Once you perform this upgrade you can document all the steps in a MOP and forward for live upgrades.

HTH-Cheers,

Swaroop

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: