no bootflash:

accu-cisco · ‎07-03-2008

So, I don't have an image on my bootflash: and I don't see a way to get it on there. Here's the output from hyperterminal.

System Bootstrap, Version 12.1(20000710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE

C7200 platform with 524288 Kbytes of main memory

an alternate boot helper program is not specified

(monitor variable "BOOTLDR" is not set)

and unable to determine first file in bootflash

loadprog: error - on file open

boot: cannot load "cisco2-C7200"

System Bootstrap, Version 12.1(20000710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE

C7200 platform with 524288 Kbytes of main memory

string is disk0:c7200-adventerprisek9-mz.124-15.T1.bin

loadprog: error - on load of image from file system with monlib

boot: cannot load "disk0:"

System Bootstrap, Version 12.1(20000710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE

C7200 platform with 524288 Kbytes of main memory

boot: cannot determine first file name on device "bootflash:"

System Bootstrap, Version 12.1(20000710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE

C7200 platform with 524288 Kbytes of main memory

rommon 1 > dir bootflash:

File size Checksum File name

rommon 2 > dir slot0:

Directory of slot0:

2 41001236 -rw- c7200-adventerprisek9-mz.124-15.T1.bin

rommon 3 > boot slot0:c7200-adventerprisek9-mz.124-15.T1.bin

loadprog: error - on load of image from file system with monlib

boot: cannot load "disk0:c7200-adventerprisek9-mz.124-15.T1.bin"

rommon 4 > help

alias set and display aliases command

boot boot up an external process

break set/show/clear the breakpoint

confreg configuration register utility

cont continue executing a downloaded image

context display the context of a loaded image

cpu_card_type display CPU card type

dev list the device table

dir list files in file system

dis disassemble instruction stream

frame print out a selected stack frame

help monitor builtin command help

history monitor command history

meminfo main memory information

repeat repeat a monitor command

reset system reset

set show all monitor variables

show_spd show all SPD data

stack produce a stack trace

sync write monitor environment to NVRAM

sysret print out info from last system return

unalias unset an alias

unset unset a monitor variable

rommon 5 >

I am really up a creek on this one. Please help!!!

Mark Yeates · ‎07-03-2008

Is this a new CF/PCMCIA card that you are using? If you have another router try to format the card through the router, and re copy the IOS back on to the card. You might want to try downloading a boot helper image to get you out of rommon. What processor are you using in the 7200?

Mark

accu-cisco · ‎07-03-2008

No, it's not new. I have been using it for a while now. What happened is that I did a 'format bootflash:'. But the image that I have always been using is still on slot0:. I don't understand why all of the sudden I can't boot off of the image I always have when the bootflash: helper image is gone. How do you suggest downloading the boot helper image and putting it in bootflash:? I don't have any tftp commands in rommon mode.

Mark Yeates · ‎07-03-2008

Do you have another card that you can use? You will need the card to get the router out of rommon to be able to copy files to bootflash. If this is not an option Xmodem will be able to transfer either the helper or the IOS to bootflash.

accu-cisco · ‎07-03-2008

No, I don't have another card. This is the same card that was working fine before I did 'format bootflash:'. The IOS image (c7200-adventerprisek9-mz.124-15.T1.bin) located on slot0: was booting perfectly before I issued that command. I don't have any xmodem commands in rommon mode so that is out of the question.