07-03-2008 08:21 AM - edited 03-05-2019 11:59 PM
Hi guys, I'm having a problem here that I hope the experts here can help me out on.
Currently, I have an Exchange server sitting on my LAN behind a Cisco 1841 (IOS v12.4 1c) which has a public IP address, meaning you would be able to access the SDM via the IP address (Insecure, I know).
Anyway, I would like to re-direct queries to the IP address to my Exchange OWA, but I am not sure how I would accomplish this using the Cisco 1841's SDM.
Solved! Go to Solution.
07-03-2008 08:54 AM
07-03-2008 08:30 AM
int e0
desc ### outside ###
ip nat outside
int e1
desc ### inside ###
ip nat inside
ip nat inside source static tcp x.x.x.x 443 interface e0 443
whrere x.x.x.x is ip address of your Exchange server
07-03-2008 08:51 AM
Hi Alekseev,
I understand the part about NAT, but OWA is accessed via 'http://
I understand that there are ways for me to allow users to access OWA by directly accessing the server IP address, but assuming if I do not go by that route, are there no other alternatives?
Thanks!
07-03-2008 08:54 AM
07-03-2008 08:58 AM
Hi Alekseev,
Ah! It's beginning to dawn upon me now. So what you're saying is, since OWA is listening on the SSL port, we would just re-direct all OWA SSL queries to the SSL port for the internal IP address of the server itself?
BTW, that was a typo in my previous post; I mean to put https://... thanks for correcting me!
07-03-2008 09:02 AM
Correct...
Since OWA is listening on the SSL port, we would just re-direct all OWA SSL queries to the SSL port for the internal IP address of the server itself
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide