dot11 radio card dns issue

Answered Question
Jul 3rd, 2008

Hello,

I've a vpn router with a dot11radio card installed. Clients on the wireless network are not able to get url names resolved. They can get to the page by using the ip address in the browser but can't get out otherwise so we know it's a dns issue. I've added the ISP's dns servers to the wireless dhcp pool and also taken them out but nothing helps. Thanks for any assistance to resolve this issue. The sanitized config file is attached.



Attachment: 
Correct Answer by Scott Fella about 8 years 7 months ago

If you remove your ACL's does it work, if not then try a public DNS like 4.2.2.1, 4.2.2.2.


Here is a link... scroll down to like the 5th thread:


http://forum.iopus.com/viewtopic.php?p=4230

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Scott Fella Thu, 07/03/2008 - 13:40

I see that you have a dhcp pool for the lan. Is users on the lan okay?

vpersaud001 Thu, 07/03/2008 - 17:20

No problems on the LAN which uses the company's DNS server. However, the wireless network by design doesn't haven't access to the corporate network and must use the ISP's DNS.

vpersaud001 Mon, 07/07/2008 - 06:56

The only ACLs are for NAT and VPN. The wireless network goes directly out to the Internet and does not need VPN connectivity and this entry "access-list 110 permit ip 192.168.yy.0 0.0.0.255" any should allow NAT. The wireless network is 192.168.yy.0/24.

I'll try the public DNS addresses. Thanks.

vpersaud001 Mon, 07/07/2008 - 07:23

Thanks very much for your help!!! Looks like the public DNS fixed the issue. I'll inform the ISP.

Scott Fella Mon, 07/07/2008 - 07:27

Good to know.... I have issues with Comcast's DNS at home, so I end up using one of those on the list. Usually Verizon's....

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode