07-05-2008 03:17 AM - edited 03-15-2019 11:45 AM
Hi all,
My PSTN phone disconnects after 25 seconds when I put it on hold from my MGCP branch router.
I don't know what other information to provide here. Please ask questions.
Thanks in advance for helping out.
Solved! Go to Solution.
07-05-2008 10:57 AM
Hi Shailendra,
Please try the following command on your gateway.
no mgcp timer receive-rtcp
From this good doc;
Hope this helps!
Rob
07-05-2008 05:01 AM
what do you mean by your pstn phone..?? Do you mean a call to the pstn or a call from the pstn..if this is it then do the following..
on your router turn on debugging..type the following in privilige mode...
debug isdn q931
term mon
place a test call and send the output of the debug
07-06-2008 06:15 AM
Hi thanks for taking the time to reply,
The call in or out to the PSTN was having the same problem.
The issue is resolved by the foll command:
no mgcp timer receive-rtcp
as suggested by Rob.
07-05-2008 10:57 AM
Hi Shailendra,
Please try the following command on your gateway.
no mgcp timer receive-rtcp
From this good doc;
Hope this helps!
Rob
07-06-2008 06:17 AM
Hi Rob,
Thanks. Spot on.
Did the job first time.
Regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: