07-06-2008 12:39 AM - edited 03-11-2019 06:10 AM
Hi Netpros,
I have PIX Firewall 515 Version 6.3(5)
I have to use the 'clear local-host' command quite often on daily basis in order for the users to connect once again. What could be the reason behind this? Any help greatly appreciated.
Regards
Faiz
07-06-2008 12:50 AM
Could you be more concrete?
07-06-2008 01:31 AM
Hi,
What i meant was that users suddenly stop communicating. But after 'clear local-host' they start to communicate again.This is the partial config of the Firewall :
global (outside) 2 10.1.99.208-10.1.99.223
global (outside) 1 10.1.99.65-10.1.99.200
global (outside) 1 10.1.99.205
global (outside) 4 10.1.99.204
nat (mangmt) 4 10.1.10.40 255.255.255.255 0 0
nat (mangmt) 4 10.1.10.41 255.255.255.255 0 0
nat (mangmt) 4 10.1.10.42 255.255.255.255 0 0
nat (mangmt) 4 10.1.10.43 255.255.255.255 0 0
nat (mangmt) 4 10.1.10.44 255.255.255.255 0 0
nat (mangmt) 4 10.1.10.45 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.59 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.62 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.63 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.65 255.255.255.255 0 0
nat (mangmt) 2 10.1.10.68 255.255.255.255 0 0
nat (mangmt) 4 10.1.10.69 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.71 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.72 255.255.255.255 0 0
nat (mangmt) 2 10.1.10.73 255.255.255.255 0 0
nat (mangmt) 2 10.1.10.74 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.77 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.79 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.81 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.90 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.92 255.255.255.255 0 0
nat (mangmt) 2 10.1.10.129 255.255.255.255 0 0
nat (mangmt) 2 10.1.10.134 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.143 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.152 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.162 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.170 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.180 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.181 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.184 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.186 255.255.255.255 0 0
nat (mangmt) 2 10.1.10.187 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.201 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.202 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.203 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.204 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.205 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.206 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.207 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.208 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.209 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.225 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.240 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.241 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.242 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.244 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.246 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.247 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.248 255.255.255.255 0 0
nat (mangmt) 1 10.1.10.128 255.255.255.192 0 0
nat (mangmt) 3 10.1.48.0 255.255.240.0 0 0
nat (front) 1 10.1.3.0 255.255.255.0 0 0
nat (dmz) 1 10.1.41.0 255.255.255.0 0 0
and some static mappings. Is it misconfiguration.
Regards
Faiz
07-07-2008 05:37 AM
Any solution for this guys
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide