07-06-2008 09:34 AM - edited 03-06-2019 12:01 AM
hi,
how can i backup the configuration of a switch using Telnet ?
How can i Restore the backed up configuration using the console ?
07-06-2008 10:43 AM
Tarek,
Go over this complete link.
Managing software images/working with Configuration files - backup restore
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfab.shtml
for just console connectivity using terminal emulator try
switch#copy xmodem: ? <-- place question mark to see submenu options
Rgds
-Jorge
PLS rate any helpful post if it does!
07-06-2008 02:29 PM
Hi,
when i execute the following command :
copy flash:config.text tftp:
i get :
%Error opening tftp://192.168.0.1/config.text (Timed out)
about the tftp, should i install a specific software on my machine ? where will the config.text file be stored ?
08-13-2008 05:20 AM
Try pinging from the switch to the TFTP Server. Chances are there is something there blocking the traffic. Windows firewall or VPN software will block it. I could ping from the server to the switch but not the other way around and had to disable the VPN security policy for it to work.
08-13-2008 05:37 AM
Yes.You could download a free copy from http://www.solarwinds.com.
config file will be stored in the base/root directory path set on the tftp application.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide