Provide Outside Dialtone

miskoolak · ‎07-06-2008

Dear all

I have connected MD110 Ericsson to cisco vocie gateway 2821.

the router is also connected via Ethernet to another router

the router B is also connected to another PBX(B).

the PBX(B) users want to hear PSTN dial tone.but nothing to hear!!

Router B:

dial-peer voice 9 voip

destination-pattern 9

session target ipv4:1.1.1.1(router A)

-------------------

router A:

dial-peer voice 10 pots

destination-pattern 9

forward digit all

port 0/2/0:15 (e1 port to pbx a )

------------------------------

whit this configure everything works but no PSTN dial tone

please help me.

gogasca · ‎07-06-2008

What u mean with PSTN dial tone?

MD110 -- 2821 -- Router B -- PBXB

Please clarify

miskoolak · ‎07-06-2008

ok..when you want to call with ordinary phones you can hear DIAL TONE from the PSTN then you will dial your destination number.

MD110 is erricson PBX.

I want that when a user is behind PBX B and dials "9" to access outside via PBX A. it can hear PSTN Dial TOne.

let me know if there is further questions