Wireless LAN Controller support lightweight access point 1242 over wireless

Unanswered Question
Jul 6th, 2008
User Badges:

Cisco Wireless LAN Controller 4402 can support lightweight access point 1242 over wireless backbone or need ethernet connection?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Scott Fella Sun, 07/06/2008 - 16:22
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

You can have a LAP 1242 on the opposite end of a wireless backbone, either running in H-REAP or Local, depending on the bandwidth of the backbone. There are minimum requirements for H-REAP ap's.


For H-REAP's connected to a centralized wireless LAN controller, the WAN link must support a minimum speed of 128-kbps WAN throughput and 100-ms maximum roundtrip latency between each H-REAP and the wireless LAN controller.


Here is a link.


http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/prod_white_paper0900aecd804f1a23_ns337_Networking_Solutions_White_Paper.html


http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc3b8.shtml

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode