IP subneting

Unanswered Question
Jul 6th, 2008
User Badges:

hi, i have a network 10.x.96.160/27 total 30 hosts are there in the network. I want 6 IPS seperately so can i vlsm to get the 6 ip seperately and rest of the IPS i want to use seperately.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Haris P Sun, 07/06/2008 - 23:28
User Badges:
  • Bronze, 100 points or more

Dear ,


Wubnet your class as given below to make 6 IP's on each class .


10.X.96.160 /29

10.X.96.168 /29

10.X.96.176 /29

10.X.96.184 /29


Regards

Haris

goutam_04 Sun, 07/06/2008 - 23:38
User Badges:

I want to divide in 2 networks, one is for 6 ips so i can take 1st one .160/29 and another is for rest. so pls. can you tell me what will be network ip and subnet mask for rest of the ips.

Rick Morris Mon, 07/07/2008 - 06:23
User Badges:
  • Silver, 250 points or more

what are you wanting?


You are not very clear in what you are wanting to do.


You want to subnet the block.

This much is understood.


You have a /27 which provides 32 addresses, 30 usable.


How many subnets do you want and how many hosts in each subnet do you want?


According to this last post you want 2 subnets, which by your statement would be a /28

16 addresses each, 14 usable.


Then you mention a /29

So, by what you need you will have more than 2 subnets. You will end up with 3, a /28 and 2 /29's


10.0.0.0/27

10.0.0.0 - .31

10.0.0.1 - .30


/28 255.255.255.240

10.0.0.0 - .15

10.0.0.1 - .14 (usable)


/29 255.255.255.248

10.0.0.16 - .23

10.0.0.17 - .22 (usable)


/29 255.255.255.248

10.0.0.24 - .31

10.0.0.25 - .30 (usable)



Is this what you are talking about?

Actions

This Discussion