07-07-2008 01:49 AM - edited 03-03-2019 10:36 PM
Hi Experts,
do any one know about TCL Scripting on Cisco Router and Switches.
1)How to use TCL ?
2)Do we need to know any progaming language to writee TCL Script?
Thanks in Advnce
Kiran
Thanks in Advnce
Kiran
Solved! Go to Solution.
07-07-2008 02:14 AM
Kiran,
This is the standard book for TCL:
There is also this book for beginners:
TCL is quite an easy language once you are into it, but it is definitely not a zero-effort solution. You will not be able to use it unless you are prepared to work at it a bit.
Can you program in C or in shell or any other scripting language? That would be a good starting point.
Kevin Dorrell
Luxembourg
07-07-2008 01:53 AM
1. See: http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_script_tcl.html
2. You need to know or learn TCL.
Please rate post if it helps!
07-07-2008 01:56 AM
I need to know and learn TCL.please provide me with more details if you have.
Thanks & Regards
Kiran
07-07-2008 02:05 AM
You can buy a book or read on the internet. TCL is a very simple language.
Please rate post if it helps!
07-07-2008 02:14 AM
Kiran,
This is the standard book for TCL:
There is also this book for beginners:
TCL is quite an easy language once you are into it, but it is definitely not a zero-effort solution. You will not be able to use it unless you are prepared to work at it a bit.
Can you program in C or in shell or any other scripting language? That would be a good starting point.
Kevin Dorrell
Luxembourg
07-07-2008 06:32 AM
hi!
there is an excellent opensource tutor available for TCL known as "TCL Tutor"
It has a lot of lessons and you can run sample codes in that and practice. It explains well along with examples.
Following is the download link :
http://www.msen.com/~clif/TclTutor.html
Hope this is helpful.
(Please rate if it helps)
Regards,
Niranjan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: