07-07-2008 04:48 AM
Hello
I've just installed cisco works with LMS 3.
But when i wanted to add devices using snmp v3 encryption i do not have any fields for encryption (there is only username/password/engineid/type of authentication). Lack of private encryption password or type of encryption. Does it mean that cisco works does not support full snmp v3 with encryption ?
Thanx
Solved! Go to Solution.
07-07-2008 06:00 AM
AuthPriv was added in LMS 3.0.1. Which release are you running?
07-07-2008 06:00 AM
AuthPriv was added in LMS 3.0.1. Which release are you running?
07-07-2008 09:30 PM
Thanks for help, i had version 3.0 of LMS, i'm installing 3.0.1 right now.
07-07-2008 11:36 PM
Hi , not sure if encryption is a requirement on your side, but i use AuthPriv only. not encryption: here a nice sample:
snmp-server group netops v3 auth write cview
snmp-server group helpdesk v3 noauth read hdview
snmp-server group netops v3 auth write v1default
snmp-server view cview mib-2 included
snmp-server view cview cisco included
snmp-server view cview internet included
snmp-server view cview v1default included
snmp-server view hdview mib-2 included
snmp-server view hdview internet included
snmp-server view hdview cisco excluded
snmp-server user cw2k netops v3 auth md5 XXXXXX
snmp-server user cwhd helpdesk v3
snmp-server ifindex persist
snmp-server trap-timeout 120
snmp-server queue-length 30
snmp-server system-shutdown
snmp-server host 10.0.1.5 version 3 auth cw2k config entity envmon snmp
cheers
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: