eigrp feasible successor

Unanswered Question
Jul 7th, 2008

hi,

I just want to know if this how eigrp show a feasible successor

for exemple:


P 192.168.1.4/30, 1 successors, FD is 29468416

via 192.168.1.18 (29468416/21845248),Serial1/1

via 192.168.1.9 (57912832/21845248), Serial1/0


is the route via 192.168.1.9 is a FS?

thanx

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
andrew.prince@m... Mon, 07/07/2008 - 06:26

The route via 192.168.1.18 is the first feasible sucessor, the route via 192.168.1.9 is the other.


An example from one of my routers is:-


P x.x.x.x/8, 1 successors, FD is 129767680

via x.x.x.x (129767680/129765120), FastEthernet0/0.2

via x.x.x.x(385250304/128025344), Tunnel3

via x.x.x.x(641250560/128025600), Tunnel4



HTH.



fd_case17 Mon, 07/07/2008 - 06:44

show ip route says: ( in my exemple)

that the route to 192.168.1.0 is via 192.168.1.18 with metric 29468416

so

there is a successor

and a FS :via 192.168.1.9 (57912832/21845248), Serial1/0

its all right

do you know how to change the K values?

andrew.prince@m... Mon, 07/07/2008 - 06:59

Correct.


You change the K values in the EIGRP process. the default K values used are bandwidth and Delay. The command is:-


metric weights tos k1 k2 k3 k4 k5


The command defaults to a setting of 0 1 0 1 0 0, meaning that only bandwidth and delay are used to calculate the metric


HTH.

Actions

This Discussion