Upgrading from Callmanager 4.1(3) to Unified Communication 6.1(2)

shamugalu1 · ‎07-07-2008

Can we do a direct upgrade from CM 4.1(3) to UCM 6.1(2. If yes, is there any hardware compatibility issues currently all servers are HP hardware platform running Windows 2000, how about Operating system (Windows 2000/2003? or Linux?) how about compatibility with Unity 4.2(1)?, IPCC 4.0(4)are there any issues? Any pros and cons for going 6.x?

Jaime Valencia · ‎07-07-2008

have you checked the compatibility matrix???

Supported Cisco Unified Communications Manager Upgrades

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp1168414

you will use Linux, since you do not mention the server model check the link:

Cisco Unified Communications Manager Server Support Matrix

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html

for unity make sure to install the latest TSP.

SCCP Compatibility Matrix: Cisco Unity, the Cisco Unity-CM TSP, Cisco Unified CM, and Cisco Unified CM Express

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/compatibility/matrix/cutspmtx.html

Cisco Unified Contact Center Express

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp1569721

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

shamugalu1 · ‎07-07-2008

javalenc,

This information is very helpful and I appreciate it.

Thanks.

pepito1983 · ‎07-17-2008

Hi shamugalu1, let me know if your upgrade was successfull because i am going to do the same job.

Thanks,

Jose

shamugalu1 · ‎07-18-2008

Jose,

I haven't done yet, we have a lot of other applications that depends on the current CCM so I'm still evaluating dependencies and compatibilities.

pepito1983 · ‎07-18-2008

Oh, ok shamugalu1. Please let me know how it is going.

Best wishes on that, Jose