Paolo Bevilacqua Mon, 07/07/2008 - 09:20

Follow the admin guide for configuring the system for SIP phones.

On the phones, configure username same as extension, and password. Of course configure the CME address as proxy and registrar.

Nothing else is required. Note cisco doesn't supports third-party phones so if something doesn't work, you're are on your own.

Please rate post if it helps!

m.elmaaroufi Mon, 07/07/2008 - 09:38


and thank you for your feed back, i don't need to configure the sip server in this unit?

Paolo Bevilacqua Mon, 07/07/2008 - 10:21

Yes, as explained in the administrator guide.

As an appreciation to those providing answers, please rate useful posts with the scrollbox below!


This Discussion