07-07-2008 01:40 PM - edited 03-15-2019 11:47 AM
All, I hate to be a bonehead on this, but Im having somewhat of a hard time with the Presence configuration. I have this installed, but not really sure where to go or what needs to be done in the configuration. Anyone with any experience in this have a "checklist" of what should be done that they would share? Id appreciate the help.
07-07-2008 02:03 PM
Troubleshooter is a good start
http://cisco.com/en/US/docs/voice_ip_comm/cups/6_0_1/doc_guide/documentation/guide/dgcps601.html
07-07-2008 03:09 PM
Thanks, I found the deployment guide. This should help alot. Thanks again.
07-07-2008 03:17 PM
No problem, if you have any issues, please continue posting here
07-09-2008 08:05 AM
As a side note, the guide will lead you to setup the application > Cisco Unified Personal Communicator > Settings. What TFTP ip address is suppose to be entered here? I don't see TFTP as a service active in the control panel of the CUPS.
07-09-2008 08:50 AM
I ended up answering my own question at:
07-09-2008 02:08 PM
Hi,
Once the Presence is up it has an installtion check list you can run through that should help you complete the install. Check the Presence Admin
Cheers
Paul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide