07-08-2008 05:26 AM - edited 03-18-2019 09:15 PM
Hi everyone,
Will Unity digital networking work in the below scenario?
CallManager version 5.X with
Unity VM Only version 5.X with local exchange 2003 digital networked to another Unity version 5.X connected to a Nortel via PIMG?
The requirement here is to be able to forward messages bewteen Unitys.
The doc points that I need both Unitys to be part of the same root domain, so if my Domain is "Voice" when I'm building the 2nd Unity I will need to join the "Voice" domain and be able to see subscribers from both Unitys is this correct?
Thanks
Armando
07-08-2008 01:28 PM
No not correct, you will never see all the subscribers from both Unity server at one time the way Unity is at this time.
You have to configure Digital Networking also. (Primary location and dialing domains)
Both Unity servers also have to be in the same dialing domain.
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/networking/guide/ex/5xcunet020e.html
Hope this helps
rlp
07-08-2008 03:10 PM
Thanks RanPierce for your time and response
I will try it and provide an update.
Armando
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: