07-08-2008 05:36 AM - edited 03-03-2019 10:38 PM
Can anyone please point or direct me regarding installing a new IOS using tftp on Rommon mode. Also is this done using console cable or the crossover cable. I tried using xmodem, but it keeps giving me errors. Thanks in advance.
07-08-2008 05:37 AM
07-08-2008 06:21 AM
I keep getting the following error messages
ARP: address resolution for 10.1.1.1 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
not sure what the errors are.
07-08-2008 10:36 AM
what settings are you using?
I would guess
computer derectly connected via cross-over (or an auto sensing nic)
rommon 3 > set
PS1=rommon ! >
IP_ADDRESS=10.1.1.1
IP_SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=10.1.1.2
TFTP_SERVER=10.1.1.2
then set your computer to 10.1.1.2/24
Rommon can be a little glitchy (from my experience) so since its in rommon I'd try to get it to just the router and my computer
07-08-2008 11:49 AM
I just fixed it a few moments before your message was sent. The method was exactly the same that you had suggested. thanks very much!!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: