ACE: Routing in addition to Loadbalancing

Answered Question
Jul 8th, 2008
User Badges:

I'm planning to route some traffic while loadbalancing other traffic.


For guidance, what can I refer for simple routing in ACE.


In addition, both routing and loadbalancing traffics need to pass a same Vlan in the ACE.


In the attached Steps 1,2,3 doing loadbalancing via vlan80

Steps 4,5,6 doing routing via same VLAN 80


Is simple routing possible in ACE?


Regards

SS

Correct Answer by Gilles Dufour about 9 years 2 weeks ago

as long as you permit the traffic with an access-list inside the access-group, ace will route the traffic that does not match any class-map.

This is the default and no particular config is required.


Gilles.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Gilles Dufour Tue, 07/08/2008 - 08:29
User Badges:
  • Cisco Employee,

as long as you permit the traffic with an access-list inside the access-group, ace will route the traffic that does not match any class-map.

This is the default and no particular config is required.


Gilles.

Actions

This Discussion