pair of 5510's not talking between local interfaces

myboattail · ‎07-08-2008

I have a colo facility and a main office, both with 5510's. I have a leased line between the two 5510's. I have enabled the interfaces and can ping between the leased line interfaces - but I cannot ping between other local interfaces (Eth 0/3 and Eth 0/2) on each ASA, so I can't ping between devices attached to each ASA.

I have the same security level set and have ran the "access-list extended permit" no dice. Would someone help point me in the right direction? running config attached

THANK YOU !!!!!

a.alekseev · ‎07-08-2008

what are you trying to do?

myboattail · ‎07-08-2008

I'm trying to get the devices in NC to talk to the devices in TX.

10.100.4.x - NC Devices

10.100.4.1 - NC ASA interface

10.100.20.1 - NC ASA interface

10.100.21.1 - TX ASA interface 02

10.100.6.1 - TX ASA interface 01

10.100.6.x - TX Devices

Trying to get from 10.100.4.x to 10.100.6.x

10.100.20.x and 10.100.21.x are the only ones talking. Both ASA's have a third interface which is external (Internet) facing