Aironet 1130 AG

Unanswered Question
Jul 8th, 2008

I am configuring the Access Point and after going through the Express Setup and Express Security pages, and after turning the radios on, the Services page no longer displays HTTP, or any other services. It does however display the following...

" \n'; for (i=0; i "

and that is all.

Any ideas what has happened? I am configuring two of these and each one does this same thing, so I do not believe it to be a hardware error.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Richard Atkin Tue, 07/08/2008 - 12:03

What code are you using? Is it, 12.4(10)bJA by any chance? If so, change to 12.3(8)JEA...

craigwoody Wed, 07/09/2008 - 04:11

The Bootloader version is 12.3(8)JEA.... It seems that when I go to Security-->Admin Access and change the Authentication to "Local User List Only" and then remove the Global Password, the Services page disappears. Unless someone has something better, I think that I will keep a Global Password, but change it. That seems to have worked....


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode