07-08-2008 06:50 PM - edited 03-10-2019 04:11 AM
Hi,
I have a ASA-5520 with AIP-SSM Module in it. I have done the basic "setup" on the module and assigned it an IP address. I am using IME to connect to the IPS module. The ASA-IPS is at a remote location and has a private IP address. I have a linux server in the same subnet as the IPS IP address. I am connecting to that server remotely through SSH and doing port forwarding to connect to IPS IP address. When I start IME and connect to the locally forwarded port it connects to my IPS module perfactly fine. Please see the attached screen capture "IME_IPS_Error-1.gif" and the column where it says "event status : connected". So far so good, now I click on "configuration" tab and I get an error, please see the "IME_IPS_Error-2.gif" for the error detail. Can anyone send me some pointers to resolve this issue?
Thanks
07-08-2008 06:58 PM
07-09-2008 04:04 PM
I was able to resolve the issue. Earlier (when I had trouble) I was doing a port forwarding as localhost:10031=>IPS:443 and IME was connecting to localhost:10031. So I was getting to the IPS/IME home page and the device status was connected but when I clicked on "Configuration" tab I got error.
To resolve the issue I did the port forwarding as follows:
127.0.0.102:443=>IPS:443 and then IME was connecting to 127.0.0.102:443 and everything worked fine. Looks like earlier when I clicked on "Configuration" it tried/redirected to connect to localhost:443 intead of localhost:10031. I have attached the network diagram and the screen captures of the resolution.
07-10-2008 02:55 PM
The problem resolved for IDM 6.1 but IME still has the same problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide