07-08-2008 11:56 PM
Hi,
Is it possible to schedule a conversation capture between two hosts or VLAN? And how is it done.
thank you very much.
Solved! Go to Solution.
07-10-2008 06:41 AM
No, this is not possible. This was requested a long time ago in CSCed88137, but it has not yet been implemented.
07-09-2008 08:07 AM
You can trigger a capture by going to Capture > Buffers. You should see an Automatic_Capture buffer. Click on the "NAM Alarm" link to configure a capture alarm. Create a new Network Layer Conversation alarm for the variable you want (probably bytes). Configure the various alarm options (i.e. src and dst addresses), then set a rising threshold. This could be small if you want to see all the traffic. The check the radio button to start a capture.
07-09-2008 07:28 PM
Hi,
Thank you very much.
Is it possible to set specific time that the capture would be triggered, say 0100H and would last for 5mins?
thanks again..
07-10-2008 06:41 AM
No, this is not possible. This was requested a long time ago in CSCed88137, but it has not yet been implemented.
07-10-2008 06:40 PM
Thanks a lot, hopefully this could be implemented soon... This feature I think should be present on NAMs.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: