07-09-2008 04:23 AM - edited 03-06-2019 12:05 AM
Every time I save a configuration with "write memory" or "copy running-config startup-config" the router doesn't keep its settings when I turn it off. When it comes back on it just asks me if I want to enter initial setup. Then I have to manually copy the startup-config into the running config. What's wrong?
07-09-2008 04:26 AM
check config-register
sh ver
should be 0x2102
conf t
config-register 0x2102
end
wr
reload
07-09-2008 04:26 AM
Hi,
Check if the config-register is 0x2142. If so, it will skip the startup config while booting. Change the same to "config-register 0x2102"
HTH,
Nagendra
07-09-2008 04:36 AM
Thanks guys. That did the trick.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide