07-09-2008 07:49 AM - edited 02-21-2020 02:54 AM
I have two routers 1841 and 851 . 1841 has a Static Ip where is 851 is on DHCP i want to created VPN connection between the specified routers, specify me a proper wan and link to perform the specified task using SDM
07-09-2008 10:33 AM
Hello Imran
Nobody will be able to suggest you a WAN link without knowing 'what' applications you want to run over this VPN. Here are some helpful links:
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801dddbb.shtml
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080093f86.shtml
Please rate helpful posts.
Regards
Farrukh
07-30-2008 09:04 AM
I have similar issues, basiclly I need to config site2site vpn tunnels between ASA 5520(server side) and ASA 5505 (client side), the client side is using DHCP'd IP's. what do I need to do in proper DDNS support for this case?
any suggestions/help are appreciated.
07-30-2008 06:21 PM
Whatever the client uses does not matter. The server does not need to know the IP of the client before hand (but the reverse is not true, the client needs to know the IP of the server to connect).
Regards
Farrukh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: