Conference Call Fails

Answered Question
Jul 9th, 2008
User Badges:

Hi,

I am having trouble getting Conference Calls to work. I call a phone and after the call is active, press the Confrn button, dial the second line and call is active but as soon as I press Confrn again to bring them all together the two phones called drop with a "call failed" with fast busy. The original calling phone looks like it is connecting to the conference as it stays active with "To Conference" on the screen as the called party. Looks like a have a permissions issue somewhere with a partion or something but I cannot find anything.

Correct Answer by Jaime Valencia about 8 years 9 months ago

looks like you're using G729 and a SW CFB, SW CFB can only handle G711.


check the codecs involved


HTH


javalenc


if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jaime Valencia Wed, 07/09/2008 - 08:37
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

looks like you're using G729 and a SW CFB, SW CFB can only handle G711.


check the codecs involved


HTH


javalenc


if this helps, please rate

skroesen1 Wed, 07/09/2008 - 08:55
User Badges:

Thanks, helped put me on the right track and got it fixed.

cceykovsky Thu, 09/11/2008 - 16:09
User Badges:

I'm having a similar problem at the moment. Same symptoms, all problem phones are in the same region - G711. Any ideas?

guy.richard Fri, 09/12/2008 - 23:01
User Badges:

Is the CFB registred to the CUCM and is the CFB availiable in the wright MRG / MRGL applied to the devices ?


Hope this help


Guy

Actions

This Discussion