I am having an issue setting up a fax machine connected to a VIC2-2FXS card. The issue is that when I dial in with the fax machine connected, it goes directly to a dial tone. If I dial 9 and a number I can place a call. (not the desired result) If I connect up a analog phone, it rings and I can answer and talk just fine.
For configuration, I am using IOS 12.4(19b) [I have tried various IOS version]
My clock settings are network-clock-participate wic 0
network-clock-select 1 E1 0/0/0
Yes, this is a E1 line located in UK.
The port is:
And the dial peer is:
dial-peer voice 120 pots
description Fax Machine
I am getting 6 digits from the provider so I am matching on all digits.
I am doing this in 3 other offices in US and it works fine, so I am stumped to what is wrong.
Attached it a debug of the q931 and dialpeer.